Copyright and Trademarks

Copyright 1987-2008 © Parametric Technology Corporation, 140 Kendrick Street, Needham, MA 02494 U.S.A. All rights reserved. Copyright in the material on this site is owned by Parametric Technology Corporation (PTC). Any person is hereby authorized to view, copy, print, and distribute materials on this site subject to the following conditions:

1. The materials may be used for informational purposes only.
2. The materials may only be used for non-commercial purposes.
3. Any copy of the materials or portion thereof must include this copyright notice.

Note that any software, product, process or technology described on PTC.com may be the subject of other Intellectual Property rights reserved by PTC and its suppliers and are not licensed hereunder.

THE MATERIAL ON ptc.com IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, OR NON-INFRINGEMENT. INFORMATION DESCRIBED ON PTC.COM IS FURNISHED FOR INFORMATIONAL USE ONLY, IS SUBJECT TO CHANGE WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A GUARANTEE, COMMITMENT, CONDITION OR OFFER BY PTC AND PTC ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS DOCUMENT.

THE MATERIAL ON ptc.com (INCLUDING THIS NOTICE) COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE PERIODICALLY ADDED TO THE INFORMATION HEREIN AND THESE CHANGES WILL BE INCORPORATED INTO PTC.com. PTC MAY MAKE IMPROVEMENTS AND/OR CHANGES IN THE PRODUCT(S) AND/OR THE PROGRAM(S) DESCRIBED ON PTC.com AT ANY TIME.

RESTRICTED RIGHTS LEGEND
PTC software is Commercial Computer Software and its documentation is Commercial Computer Software Documentation which, pursuant to FAR 12.212(a)-(b) or DFARS 227.7202-1(a) and 227.7202-3(a), is provided to the Government under a limited commercial license only. For procurements predating the above clauses, use, duplication, or disclosure by the Government is subject to the restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software Clause at DFARS 252.227-7013 or Commercial Computer Software-Restricted Rights at FAR 52.227-19, as applicable. Parametric Technology Corporation, 140 Kendrick Street, Needham, MA 02494.

Software And Documentation
UNAUTHORIZED USE OF SOFTWARE OR ITS DOCUMENTATION CAN RESULT IN CIVIL DAMAGES AND CRIMINAL PROSECUTION. Software as well as user and training documentation from Parametric Technology Corporation (PTC) is subject to the copyright laws of the United States and other countries and is provided under a license agreement that restricts copying, disclosure, and use of such software and documentation. The software described on ptc.com is provided under written license agreement, contains valuable trade secrets and proprietary information, and is protected by the copyright laws of the United States and other countries. It may not be copied or distributed in any form or medium, disclosed to third parties, or used in any manner not provided for in the software licenses agreement except with written prior approval from PTC.

For Important Copyright, Trademark, Patent, and Licensing Information:
Windchill products, select About Windchill at the bottom of the product page. For InterComm products, on the Help main page, click the link for Copyright 2007. For other products, click Help > About on the main menu of the product.

Registered Trademarks of PTC
Advanced Surface Design, Advent, Arbortext, Behavioral Modeling, CADDS, Calculation Management Suite, Computervision, CounterPart, Create Collaborate Control, Designate, EPD, EPD.Connect, Epic Editor, Expert Machinist, Flexible Engineering, GRANITE, HARNESSDESIGN, Info*Engine, InPart, INTERCOMM, IsoCompose, IsoDraw, IsoView, ITEDO, Mathcad, Mathsoft, MECHANICA, NetRegulus, NetRM, the NetRegulus logo, Optegra, Parametric Technology, Parametric Technology Corporation, PartSpeak, PHOTORENDER, Pro/DESKTOP, Pro/E, Pro/ENGINEER, Pro/HELP, Pro/INTRALINK, Pro/MECHANICA, Pro/TOOLKIT, Product First, Product Development Means Business, Product Makes the Company, PTC, the PTC logo, PT/Products, Shaping Innovation, Simple · Powerful · Connected, StudyWorks, The Product Development Company, The Way to Product First, Wildfire, Windchill, Windchill DynamicDesignLink, Windchill PartsLink, and Windchill PDMLink.

Trademarks of PTC
3B2, 3DPAINT, Arbortext Editor, Arbortext Content Manager, Arbortext Contributor, Arbortext Companion for Word®, Arbortext Advanced Print Publisher – Desktop, Arbortext Advanced Print Publisher – Enterprise, Arbortext Publishing Engine, Arbortext Dynamic Link Manager, Arbortext Styler, Arbortext Architect, Arbortext Digital Media Publisher, Arbortext CSDB for S1000D®, Arbortext IETP Viewer for S1000D®, Arbortext Reviewer for S1000D®, Arbortext Authoring Interface for S1000D®, Arbortext Editor for S1000D®, Arbortext Publisher for S1000D®, Arbortext Provisioning Manager, Arbortext Provisioning Reviewer, Arbortext Provisioning Transaction Manager, Arbortext Parts Catalog Manager for S1000D®, Arbortext Learning Content Manager for S1000D®, Arbortext Learning Management System, Arbortext Reviewer for Eagle, Arbortext LSA Interface, Associative Topology Bus, AutobuildZ, AutoRound, CDRS, CV, CVact, CVaec, CVdesign, CV DORS, CVMAC, CVNC, CVToolmaker, Create · Collaborate · Control · Communicate, EDAcompare, EDAconduit, DataDoctor, DesignSuite, DIMENSION III, Distributed Services Manager, DIVISION, e/ENGINEER, eNC Explorer, Expert Framework, Expert MoldBase, Expert Toolmaker, FlexPDM, FlexPLM, Harmony, InterComm Expert, InterComm EDAcompare, InterComm EDAconduit, individual innovation. collective creativity, ISSM, KDiP, Knowledge Discipline in Practice, Knowledge System Driver, ModelCHECK, MoldShop, NC Builder, PDS Workbench, POLYCAPP, ProductPoint, Pro/ANIMATE, Pro/ASSEMBLY, Pro/CABLING, Pro/CASTING, Pro/CDT, Pro/CMM, Pro/COLLABORATE, Pro/COMPOSITE, Pro/CONCEPT, Pro/CONVERT, Pro/DATA for PDGS, Pro/DESIGNER, Pro/DETAIL, Pro/DIAGRAM, Pro/DIEFACE, Pro/DRAW, Pro/ECAD, Pro/ENGINE, Pro/FEATURE, Pro/FEM POST, Pro/FICIENCY, Pro/FLY THROUGH, Pro/HARNESS, Pro/INTERFACE, Pro/LANGUAGE, Pro/LEGACY, Pro/LIBRARYACCESS, Pro/MESH, Pro/Model.View, Pro/MOLDESIGN, Pro/NC ADVANCED, Pro/NC CHECK, Pro/NC MILL, Pro/NC POST, Pro/NC SHEETMETAL, Pro/NC TURN, Pro/NC WEDM, Pro/NC Wire EDM, Pro/NETWORK ANIMATOR, Pro/NOTEBOOK, Pro/PDM, Pro/PHOTORENDER, Pro/PIPING, Pro/PLASTIC ADVISOR, Pro/PLOT, Pro/POWER DESIGN, Pro/PROCESS, Pro/REPORT, Pro/REVIEW, Pro/SCAN TOOLS, Pro/SHEETMETAL, Pro/SURFACE, Pro/TOOLMAKER, Pro/VERIFY, Pro/Web.Link, Pro/Web.Publish, Pro/WELDING, ProductView, PTC Precision, PTC DesignQuest, Routed Systems Designer, Shrinkwrap, Validation Manager, Warp, Windchill MPMLink, Windchill ProjectLink, and Windchill SupplyLink.

Patents of Parametric Technology Corporation or a Subsidiary
Registration numbers and issue dates follow. Additionally, equivalent patents may be issued or pending outside of the United States. Contact PTC for further information. 5,771,392/23-June-1998; (EP)0240557/02-October-1986; 5,423,023/05-June-1990; 4,956,771/11-September-1990; 5,058,000/15-October-1991; 5,140,321/18-August-1992; 5,297,053/22-March-1994; 5,428,772/27-June-1995; 5,469,538/21-Nov-1995; 5,469,538/21-November-1995; 5,506,950/09-April-1996; 4,310,614/30-April-1996; 5,513,316/30-April-1996; 5,526,475/11-June-1996; 5,561,747/01-October-1996; 5,526,475/6-November-1996; 5,557,176/09-November-1996; 5,680,523/21-October-1997; 5,689,711/18-November-1997; 5,771,392/23-June-1998; 5,838,331/17-November-1998; 5,844,555/01-Dec-1998; 5,844,555/1-December-1998; 5,850,535/15-December-1998; 4,310,615/21-December-1998; 4,310,614/22-April-1999; 6,275,866/14-Aug-2001; 6,275,866/14-August-2001; 6,308,144/23-October-2001; 6,447,223B1/10-Sept-2002; 6,473,673B1/29-October-2002; PCT 03/05061/13-Feb-2003; 6,545,671B1/08-April-2003; GB2354683B/04-June-2003; GB2354683B/04-June-2003; 6,580,428B1/17-June-2003; GB2354685B/18-June-2003; GB2354684B/02-July-2003; 6,608,623B1/19-August-2003; 6,608,623B1/19-August-2003; 6,625,607B1/23-September-2003; GB2354924/24-September-2003; GB2384125/15-October-2003; GB2354686/15-October-2003; GB2353376/05-November-2003; GB2354096/12-November-2003; GB2353115/10-December-2003; 6,665,569B1/16-December-2003; (KO)415475/6-January-2004; GB2388003B/21-January-2004; GB2365567/10-March-2004; EU0812447/26-May-2004; GB2363208/25-August-2004; GB2366639B/13-October-2004; 7,006,956/28-February-2006; 7,013,246B1/14-March-2006; 7,013,468/14-March-2006; (JP)3,962,109/25-May-2007.

Third-Party Trademarks

Adobe, Acrobat, Adobe LiveCycle PDF Generator, Distiller, FrameMaker and the Acrobat logo are trademarks of Adobe Systems Incorporated.

I-Run and ISOGEN are registered trademarks of Alias Ltd.

TeX is a trademark of the American Mathematical Society.

Apple, Mac, Mac OS, Panther, and Tiger are trademarks or registered trademarks of Apple Computer, Inc.

AutoCAD and Autodesk Inventor are registered trademarks of Autodesk, Inc.

Baan is a registered trademark of Baan Company.

BEA WebLogic Server and BEA WebLogic Platform are trademarks of BEA Systems, Inc.

CATIA and CADAM are registered trademarks of Dassault Systemes, S.A.

The Sigma Check icon, CETOL, CETOL 6 Sigma are trademarks of Sigmetrix, LLC.

MEDUSA and STHENO are trademarks of CAD Schroer GmbH.

Allegro, Cadence, and Concept are registered trademarks of Cadence Design Systems, Inc.

Cognos is a registered trademark of Cognos Corporation.

CYA, iArchive, HOTbackup, and Virtual StandBy are trademarks or registered trademarks of CYA Technologies, Inc.

DataDirect Connect is a registered trademark of DataDirect Technologies.

Documentum is a registered trademark of EMC Corporation.

FileNET is a registered trademark of FileNET Corporation. Panagon is a trademark of FileNET Corporation.

PDGS is a registered trademark of Ford Motor Company.

JAWS is a registered trademark of Freedom Scientific BLV Group, LLC in the United States and other countries.

Geomagic is a registered trademark of Geomagic, Inc.

HP, Hewlett-Packard, and HP-UX are registered trademarks of Hewlett-Packard Company.

IBM, DB2, AIX, and WebSphere are registered trademarks of IBM Corporation. Advanced ClusterProven, ClusterProven, the ClusterProven design, Rational Rose, and Rational ClearCase are trademarks or registered trademarks of International Business Machines in the United States and other countries and are used under license. IBM Corporation does not warrant and is not responsible for the operation of this software product. Intel is a registered trademark of Intel Corporation.

OrbixWeb is a registered trademark of IONA Technologies PLC.

Interleaf is a trademark of Interleaf, Inc. IslandDraw and IslandPaint are trademarks of Island Graphics Corporation.

Feature-Following Anti-Aliasing is a trademark of LightWork Design.

Linux is a registered trademark of Linus Torvalds.

3Dconnexion is a registered trademark of Logitech International S.A.

MainWin and Mainsoft are trademarks of Mainsoft Corporation.

MatrixOne is a trademark of MatrixOne, Inc.

Mentor Graphics and Board Station are registered trademarks and 3D Design, AMPLE, and Design Manager are trademarks of Mentor Graphics Corporation.

Helix is a trademark of Microcadam, Inc.

Microsoft, ActiveX, Excel, JScript, Vista, Windows, Windows NT, Windows 2000, Windows 2000 Server, Windows XP, Windows Server 2003, the Windows logo, Visual Basic, the Visual Basic logo, and Active Accessibility are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Moldflow is a registered trademark of Moldflow Corporation.

Mozilla and Firefox are registered trademarks of the Mozilla Foundation.

FLEXnet, InstallShield, and InstallAnywhere are trademarks or registered trademarks of Macrovision Corporation.

Netscape, Netscape Navigator, Netscape Communicator, and the Netscape N and Ship's Wheel logos are registered trademarks or service marks of Netscape Communications Corporation in the U.S. and other countries.

OSF/Motif and Motif are trademarks of the Open Software Foundation, Inc.

Oracle and interMedia are registered trademarks of Oracle Corporation.

Palm Computing, Palm OS, Graffiti, HotSync, and Palm Modem are registered trademarks, and Palm III, Palm IIIe, Palm IIIx, Palm V, Palm Vx, Palm VII, Palm, More connected, Simply Palm, the Palm Computing platform logo, all Palm logos, and HotSync logo are trademarks of Palm, Inc. or its subsidiaries.

PANTONE is a registered trademark and PANTONE CALIBRATED is a trademark of Pantone, Inc.

Proximity and Linguibase are registered trademarks of Proximity Technology, Inc.

Elan License Manager and Softlock are trademarks of Rainbow Technologies, Inc.

RAND is a trademark of RAND Worldwide.

RosettaNet is a trademark and Partner Interface Process and PIP are registered trademarks of RosettaNet, a nonprofit organization.

SAP and R/3 are registered trademarks of SAP AG Germany.

IRIX is a registered trademark of Silicon Graphics, Inc.

S1000D is a registered trademark of Saab AB Joint Stock Company.

SolidWorks is a registered trademark of SolidWorks Corporation.

SPARC is a registered trademark and SPARCStation is a trademark of SPARC International, Inc. (Products bearing the SPARC trademarks are based on an architecture developed by Sun Microsystems, Inc.) All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. in the United States and in other countries.

Sun, Sun Microsystems, the Sun logo, Solaris, UltraSPARC, Java and all Java based marks, and “The Network is the Computer” are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and in other countries.

HOOPS is a trademark of Tech Soft America, Inc.

DOORS is a registered trademark of Telelogic AB.

UNIX is a registered trademark of The Open Group.

TIBCO is a registered trademark and TIBCO ActiveEnterprise, TIBCO Designer, TIBCO Enterprise Message Service, TIBCO Rendezvous, TIBCO TurboXML, and TIBCO BusinessWorks are trademarks or registered trademarks of TIBCO Software Inc. in the United States and other countries. I-DEAS, Metaphase, Parasolid, SHERPA, Solid Edge, TeamCenter, UG NX, and Unigraphics are trademarks or registered trademarks of UGS Corp., a Siemens group company.

Galaxy Application Environment is a licensed trademark of Visix Software, Inc.

WebEx is a trademark of WebEx Communications, Inc. API Tookit is a trademark of InterCAP Graphics Systems, Inc. BEA and WebLogic are registered trademarks of BEA Systems, Inc.

X Window System is a trademark of X Consortium, Inc.