|
ATTENTION: THIS PAGE IS
BEING UPDATED CONTINUOUSLY. PLEASE CHECK BACK FREQUENTLY.
This Product Resource page covers the impact
the Timeout issue has on this product/release, what options are available
to address the impact, and provide additional information including Files
and Instructions necessary to resolve the Timeout issue.
The
following 3 sections should be read sequentially:
Impact – Current
known areas affected by the timeout issue.
Resolution –
Description of the actions required to resolve affected areas.
Files and Instruction
– Links to updates required and instructions on how they should be
applied.
__________________________________________________________________________
Impact
- PTC/Setup
is the installation program used by most PTC products. After
January 10th it will no longer be possible to install many
CDs that use PTC/Setup.
- The
following CDs require the new PTC/Setup: Â
|
Windchill
DynamicDesignLink
|
|
Windchill
Foundation & PDM
|
|
Windchill
Info*Engine
|
|
Windchill
Workgroup Manager for Pro/ENGINEER
|
- The CAD generation capabilities
of Windchill DynamicDesignLink Release 6.2.6 are performed by one or
more copies of Pro/ENGINEER that are installed on designated CAD
Worker machines. Each of these Pro/ENGINEER installations must
be corrected using the same NMSD downloadable patch.
Please follow the instructions at the location listed below.
- Windchill
Visualization Services (WVS)
- Windchill DynamicDesignLink will
not be able to generate Pro/ENGINEER models or viewables. This
capability utilizes functionality provided by the Pro/ENGINEER File
Adapter DLL. This capability will fail unless
corrected using the instructions provided below.
- Windchill Workgroup Manager for Pro/ENGINEER 2001
- Pro/ENGINEER 2001 will not start
from a Windchill Workgroup Manager Workspace.
- Users will not be able to open a
Pro/ENGINEER model from a Workspace
- Users will not be able to upload
and download Pro/ENGINEER files
-
Windchill Workgroup
Manager for Pro/ENGINEER Wildfire
-
Pro/ENGINEER Wildfire will not be able to communicate with Windchill
DynamicDesignLink
__________________________________________________________________________
Resolution – Please refer to Impact section to determine which resolution steps
are necessary for your system then the Files and
Instructions section to obtain related updates.
- PTC/Setup – This file is
required to run PTC/Setup from an existing CD or CD Image. When
available, download the files and follow the Instructions for
PTC/Setup below.
- Windchill DynamicDesignLink CAD Generation
- NMSD - The
CAD generation capabilities of Windchill DynamicDesignLink Release
6.2.6 are performed by one or more copies of Pro/ENGINEER that are
installed on designated CAD Worker machines. Each of these
Pro/ENGINEER installations must be updated using the same NMSD
downloadable file. Please follow the instructions listed for appropriate
release of Pro/ENGINEER at the location listed below.
- Windchill Visualization Services (WVS)
- File Adapter DLL - This
Temporary Patch is required to allow automatic assignment of
Pro/ENGINEER calculated values to matching IBAs. This patch is the
same as the one provided for Windchill Workgroup Manager for
Pro/ENGINEER 2001. When available, download this new file and
follow the instructions for the “Windchill Workgroup Manager
for Pro/ENGINEER File Adapter” below.
- Windchill Workgroup Manager for Pro/ENGINEER 2001
- Pro/ENGINEER Software Update – To allow both the ability
to start Pro/ENGINEER 2001 from a Windchill Workgroup Workspace and open Pro/ENGINEER
models from a Workspace, a new build of Pro/ENGINEER must be
installed. This build is Pro/ENGINEER Datecode 2003441 or
later. Therefore, when this build becomes available, it is
recommended that a new installation be performed. If you install this
new Datecode you DO NOT need to apply the NMSD fix.
However, with this new build of Pro/ENGINEER 2001 it is still
necessary to apply the File Adapter DLL patch.
- NMSD - This update will allow
Pro/ENGINEER to start from a Windchill Workgroup Manager for
Pro/ENGINEER Workspace. This downloadable file will replace the
current NMSD file in your Pro/ENGINEER installation. This
option is available if an update of Pro/ENGINEER is not possible.Â
Please follow the instructions listed for appropriate release of
Pro/ENGINEER at the location listed below.
- Windchill Workgroup Manager for
Pro/ENGINEER File Adapter DLL – This Temporary Patch is
required to allow for successful upload and download using the
Workgroup Manager for Pro/ENGINEER 2001. When available,
download this new file and follow the instructions for the
“Windchill Workgroup Manager for Pro/ENGINEER File
Adapter” below.
-
Windchill Workgroup
Manager for Pro/ENGINEER Wildfire
-
Pro/ENGINEER Software Update
–
Customers must upgrade their Pro/ENGINEER software to Pro/ENGINEER
Wildfire Datecode 2003451 or later.
__________________________________________________________________________
Files and Instructions- The files below are currently available for this
product/release as well as Instructions for applying the fixes. Please refer to Impact and Resolution sections to determine which
files and instructions are necessary for your system. Please download
the required files first, then the Installation Instructions.Â
PTC/Setup Files
PTC/Setup Installation Instructions
NMSD Files
Please visit the appropriate Timeout
Resource page for your Pro/ENGINEER Release.
Click one:
Windchill Workgroup Manager for
Pro/ENGINEER File Adapter DLL
|
|
Primary Server
|
|
All
Platforms
|
HTTP
|
Installation instructions are
contained within the README file found in the downloaded temporary patch.
 Return to the Technical
Resource page
|
