Timeout Resource - Last Updated Wednesday, 20-Dec-2006 10:44:41 EST

ATTENTION: THIS PAGE IS BEING UPDATED CONTINUOUSLY. PLEASE CHECK BACK FREQUENTLY.

Windchill ProjectLink Release 6.2.6 - Timeout Resource Page

This Product Resource page covers the impact the Timeout issue has on this product/release, what options are available to address the impact, and provide additional information including Files and Instructions necessary to resolve the Timeout issue.

The following 3 sections should be read sequentially:

Impact – Current known areas affected by the timeout issue.

Resolution – Description of the actions required to resolve affected areas.

Files and Instruction – Links to updates required and instructions on how they should be applied.

__________________________________________________________________________

Impact

Windchill ProjectLink Release 6.2.6.00 – 6.2.6.03

  • PTC/Setup

o         PTC/Setup is the installation program used by most PTC products.  After January 10th it will no longer be possible to install many CDs that use PTC/Setup.

o         The following CDs require the new PTC/Setup:  

 

Windchill ProjectLink                                       

Windchill Info*Engine

 

  • CAD Manager for Pro/ENGINEER

o         Pro/ENGINEER will not be able to communicate with Windchill.

  • Windchill Visualization Service (WVS)

o         Windchill will not be able to generate Pro/ENGINEER viewables.

Windchill ProjectLink Release 6.2.6.04 – 6.2.6.06

  • PTC/Setup - (See above)
  • CAD Manager for Pro/ENGINEER 2001 - (See above)
  • CAD for Pro/ENGINEER Wildfire

o         Pro/ENGINEER Wildfire will not be able to communicate with Windchill.

  • Windchill Visualization Service (WVS) - (See above)

 

Windchill ProjectLink Release 6.2.6.07

  • PTC/Setup - (See above)
  • CAD Manager for Pro/ENGINEER 2001 - (See above)
  • CAD for Pro/ENGINEER Wildfire

o         Pro/ENGINEER Wildfire will not be able to communicate with Windchill.

  • Windchill Visualization Service (WVS) - (See above)

__________________________________________________________________________

Resolution – Please refer to Impact section to determine which resolution steps are necessary for your system then the Files and Instructions section to obtain related updates.

 

  • PTC/Setup – This file is required to run PTC/Setup from an existing CD or CD Image.  When available, download the files and follow the Instructions for PTC/Setup below.
  • CAD Manager for Pro/ENGINEER 2001
    • NMSD - This file will replace the current NMSD file in your Pro/ENGINEER installation.  Please follow the instructions listed for appropriate release of Pro/ENGINEER at the location listed below.
  • CAD Manager for Pro/ENGINEER Wildfire
    • Pro/ENGINEER Software Update – Customers must upgrade their Pro/ENGINEER software to Pro/ENGINEER Wildfire Datecode 2003451 or later.
  • Windchill Visualization Service (WVS)
    • NMSD - The Pro/ENGINEER software that is being accessed by the Windchill Visualization Service CAD Worker must have the new NMSD file applied or must be upgraded to Pro/ENGINEER 2001 Datecode 2003441 (or later), or Pro/ENGINEER Wildfire Datecode 2003451 (or later).
    • Windchill Workgroup Manager for Pro/ENGINEER File Adapter DLL – If your Windchill system is configured with File Synchronization this temporary patch is required to enable proper Pro/ENGINEER viewable generation.   When available, download this new file and follow the instructions for the “Windchill Workgroup Manager for Pro/ENGINEER File Adapter” below.  If you are using a distributed CAD agent, be sure to follow the specific distributed CAD agent instructions.

    NOTE: The Windchill Workgroup Manager for Pro/ENGINEER File Adapter DLL is NOT required with DSU 7.

 

__________________________________________________________________________

Files and Instructions- The files below are currently available for this product/release as well as Instructions for applying the fixes.  Please refer to Impact and Resolution sections to determine which files and instructions are necessary for your system.  Please download the required files first, then the Installation Instructions. 

 

 

 

PTC/Setup Files

 

  

  

 

Primary Server

alpha_unix

HTTP

i486_nt (NT, 2000, XP)

HTTP

i486_win95

HTTP

hp8k

HTTP

hpux11_pa32

HTTP

hpux_pa64

HTTP

ibm_rs6000

HTTP

sgi_mips4

HTTP

sun4_solaris

HTTP

sun4_solaris_64

HTTP

 

 

PTC/Setup Installation Instructions

 

 

 

NMSD Files

Please visit the appropriate Timeout Resource page for your Pro/ENGINEER Release.

Click one:

 

 

 

 
Windchill Workgroup Manager for Pro/ENGINEER File Adapter DLL

 

 

Primary Server

All Platforms 6.2.6.00, DSU 2, DSU 3

Contact PTC Technical Support to obtain this Temporary Patch

All Platforms

HTTP

All Platforms 6.2.6 DSU 7

Not Affected

 

Installation instructions are contained within the README file found in the downloaded temporary patch.

 

 

 

 

 Return to the Technical Resource page