Timeout Resource - Last Updated Wednesday, 20-Dec-2006 11:31:35 EST

ATTENTION: THIS PAGE IS BEING UPDATED CONTINUOUSLY. PLEASE CHECK BACK FREQUENTLY.

Windchill Release 6.2 - Timeout Resource Page

This Product Resource page covers the impact the Timeout issue has on this product/release, what options are available to address the impact, and provide additional information including Files and Instructions necessary to resolve the Timeout issue.

The following 3 sections should be read sequentially:

Impact – Current known areas affected by the timeout issue.

Resolution – Description of the actions required to resolve affected areas.

Files and Instruction – Links to updates required and instructions on how they should be applied.

__________________________________________________________________________

Impact

Windchill Release 6.2 – 6.2.2 All DSU Levels

  • PTC/Setup

o         PTC/Setup is the installation program used by most PTC products.  After January 10th it will no longer be possible to install many CD’s that use PTC/Setup.

o         The following CDs require the new PTC/Setup:  

 

 

Windchill Foundation & PDM

Windchill Info*Engine

Windchill Language DSU Release 6.2

 

  • Windchill Workgroup Manager for Pro/ENGINEER 2001

o         Pro/ENGINEER 2001 will not start from a Windchill Workgroup Manager Workspace.

o         Users will not be able to open a Pro/ENGINEER model from a Workspace

o         Users will not be able to upload and download Pro/ENGINEER files

  • Windchill Visualization Service (WVS)

o         Windchill will not be able to generate Pro/ENGINEER viewables

 

 

__________________________________________________________________________

Resolution – Please refer to Impact section to determine which resolution steps are necessary for your system then the Files and Instructions section to obtain related updates.

  • PTC/Setup – This file is required to run PTC/Setup from an existing CD or CD Image.  When available, download the files and follow the Instructions for PTC/Setup below.
  • Windchill Workgroup Manager for Pro/ENGINEER 2001
    • Pro/ENGINEER Software Update – To allow both the ability to start Pro/ENGINEER 2001 from a Windchill Workgroup Workspace and open Pro/ENGINEER models from a Workspace, a new build of Pro/ENGINEER must be installed.  This build is Pro/ENGINEER Datecode 2003441 or later.  Therefore, when this build becomes available, it is recommended that a new installation be performed. If you install this new Datecode you DO NOT need to apply the NMSD fix.
    • NMSD - This update will allow Pro/ENGINEER 2001 to start from a Windchill Workgroup Manager for Pro/ENGINEER 2001 Workspace.  This downloadable patch will replace the current NMSD file in your Pro/ENGINEER installation.  This option is available if an update of Pro/ENGINEER is not possible.  Please follow the instructions listed for appropriate release of Pro/ENGINEER at the location listed below.
    • Windchill Workgroup Manager for Pro/ENGINEER File Adapter DLL – This Temporary Patch is required to allow for successful upload and download using the Workgroup Manager for Pro/ENGINEER 2001 (6.2.2.03 and greater). When available, download this new file and follow the instructions for the “Windchill Workgroup Manager for Pro/ENGINEER File Adapter DLL” below. 
  • Windchill Visualization Service (WVS)
    • NMSD - The Pro/ENGINEER software that is being accessed by the Windchill Visualization Service CAD Worker must have the new NMSD file applied or must be upgraded to Pro/ENGINEER 2001 Datecode 2003441 (or later).
    • Windchill Workgroup Manager for Pro/ENGINEER File Adapter DLL – If your Windchill system is configured with File Synchronization (6.2.2.03 and greater) this temporary patch is required to enable proper Pro/ENGINEER viewable generation.   This also applies to a Windchill system configured with the Pro/INTRALINK Gateway. When available, download this new file and follow the instructions for the “Windchill Workgroup Manager for Pro/ENGINEER File Adapter” below.  If you are using a distributed CAD agent, be sure to follow the specific distributed CAD agent instructions.

 

 

__________________________________________________________________________

Files and Instructions- The files below are currently available for this product/release as well as Instructions for applying the fixes.  Please refer to Impact and Resolution sections to determine which files and instructions are necessary for your system.  Please download the required files first, then the Installation Instructions. 

 

 

 

PTC/Setup Files

 

PTC/Setup Files for Windchill Info*Engine and Windchill Foundation & PDM

 

 

Primary Server

i486_nt (NT, 2000, XP)

HTTP

hp8k

HTTP

ibm_rs6000

HTTP

sun4_solaris

HTTP

   

PTC/Setup Files for Windchill Language DSU Release 6.2

 

 

Primary Server

alpha_unix

HTTP

i486_nt (NT, 2000, XP)

HTTP

i486_win95

HTTP

hp8k

HTTP

hpux11_pa32

HTTP

hpux_pa64

HTTP

ibm_rs6000

HTTP

sgi_mips4

HTTP

sun4_solaris

HTTP

sun4_solaris_64

HTTP

 

PTC/Setup Installation Instructions

 

 

 

 

      NMSD Files

Please visit the appropriate Timeout Resource page for your Pro/ENGINEER Release:

 

 

 

 

 Windchill Workgroup Manager for Pro/ENGINEER File Adapter DLL

 

NOTE: Only required for Windchill Release 6.2.2 DSU 3 and greater.

 

 

 

Primary Server

All Platforms 6.2.2 DSU 3 and greater.

HTTP

 Return to the Technical Resource page