1. 主页
  2. 支持
技术文章 - CS22089

如何确定机器的HOST ID？

已修改: 20-Aug-2024   


注意：本文已使用机器翻译软件翻译，以方便非英语客户阅读。但翻译内容可能包含语法错误或不准确之处。请注意， PTC对本文所含信息的翻译准确性及使用后果不承担任何责任。请在 此处 查看本文的英文原始版本以便参考。有关机器翻译的更多详情，请单击 此处 。
感谢您告诉我们。我们将尽快审阅此译文。

适用于

  • Creo Parametric 1.0 to 10.0
  • Mathcad Prime 1.0 to 9.0
  • PTC Arbortext Editor 7.0 to 8.2
  • All PTC FLEX-enabled products use the machine's network card Physical (or MAC) Address for license configuration purposes. This address is a unique, permanent ID affixed to all network cards and recognized on Ethernet based networks.
  • PTC refers to this Physical Address as the hostID or PTC_HOSTID of the machine to be licenses whether for a floating FlexNet server license or a local locked license file. The hostID can be recognized as a series of two digit hexadecimal characters. This will be a set of 6 on a Windows machines example: 00-1A-2B-3C-4D-55.
  • PTC software and License Management tools should recognize the hostID as obtained from any wired or wireless network card physically present in the workstation as a valid hostID. The hostID or PTC_HOSTID should be built off of the main "wired" network card on a system for best practices but can be built off any valid network card. A hostID as obtained from other network cards such as Firewire ports or virtual network cards should be seen as invalid by PTC License Management tools and therefore not be used.

说明

  • 如何确定用于许可的机器的 HOST ID？
  • 如何找到正确的HOST ID来提交许可证请求？
  • 生成许可证文件需要哪些信息？
  • 如何识别许可证文件的正确主机 ID？
  • 需要以太网端口吗？
这是文章 22089 的 PDF 版本，可能已过期。最新版本 CS22089