Article - CS30130
How to change the default template for parts, assemblies and drawings in Creo Parametric
Modified: 26-Sep-2025
Applies To
- Pro/ENGINEER and Creo Elements/Pro Wildfire 2.0 to Wildfire 5.0
- Creo Parametric 1.0 to 11.0
- Windchill PDMLink 11.0 to 12.1
- Creo Simulate 1.0 to 8.0
Description
- How to change the default template for a solid part
- How to change the default template setting to a custom template located in a different folder
- How to set new default template for a solid part
- Which config.pro option specifies default model templates
- How to specify model templates
- How to specify assembly template
- How to specify part template
- How to specify drawing template
- How to configure Creo to use specific templates for parts, assemblies and drawings when creating a new part, assembly or drawing
- The default model unit cannot be changed to metric mm/kg
- Is it possible to use a lower version's assembly, model and drawing template to the upper release?
- How to set to automatically use mm as the unit when creating part model files?
- How to specify template option is always set to Empty when creating a new drawing
This is a printer-friendly version of Article 30130 and may be out of date. For the latest version click CS30130