Article - CS311371
Multiple config.pro options are documented in Creo Parametric 4.0 M100 Help Center but not listed in the CSV file containing all existing configuration options
Modified: 22-Apr-2022
Applies To
- Creo Parametric 6.0.0.0 to 6.0.2.0
- Creo Parametric 5.0.0.0 to 5.0.6.0
- Creo Parametric 7.0.0.0 to 7.0.1.0
- Creo Parametric 4.0 M100
Description
- The following config.pro options are documented in the Help Center but not listed in the CSV file containing all existing configuration options:
- acis_export_params
- acis_export_units
- acis_out_version
- catia_out_to_existing_model
- enable_acis_export_extension
- iges_out_all_srfs_as
- iges_out_assembly_default_mode
- iges_out_ent_as_bspline
- iges_out_spl_crvs_as_126
- iges_out_spl_srfs_as_128
- iges_out_trim_xyz
- iges_out_trm_srfs_as_143
- intf_out_as_bezier
- intf_out_assign_names
- intf_out_auto_layer_ids
- intf_out_auto_layer_ids
- intf_out_blanked_entities
- intf_out_cat_start_model
- intf_out_ed_recipe_file
- intf_out_max_bspl_degree
- intf_out_pvs_recipe_file
- intf_pv_recipe_dir
- intf3d_out_anno_as
- intf3d_out_cat2_ident_crv
- intf3d_out_cat2_ident_pt
- intf3d_out_cat2_infinity
- intf3d_out_cat2_model_sz
- intf3d_out_cat2_sag
- intf3d_out_cat2_step
- intf3d_out_catia_v5_version
- intf3d_out_datums_by_default
- intf3d_out_default_option
- intf3d_out_extend_surface
- intf3d_out_force_surf_normals
- intf3d_out_jt_auto_lods
- intf3d_out_jt_brep
- intf3d_out_jt_config_name
- intf3d_out_jt_config_path
- intf3d_out_jt_structure
- intf3d_out_parameters
- intf3d_out_prop_chord_heights
- intf3d_out_prop_step_sizes
- intf3d_out_surface_deviation
- intf3d_out_unicode_to_neutral
- intf3d_out_use_num_names
- intf3d_out_use_step_size
- intf3d_parasolid_export_schema
- pro_datum_target_dir
- setting intf_out_asm_mapped_item
- step_appearance_layers_groups
- step_export_ap214_asm_def_mode
- step_out_asm_val_prop
- step_out_material
- step_out_material_as_product
- step_out_suppl_geom
- vda_header
This is a printer-friendly version of Article 311371 and may be out of date. For the latest version click CS311371