Article - CS333216
Support for GE Fanuc (Series One), Koyo, or TI PLC
Modified: 02-Nov-2020
Applies To
- Kepware Server (formerly KEPServerEX) 5.19.467.0 to 6.8
- ThingWorx Kepware Server (legacy) 8.0 to 8.4
Description
The AutomationDirect K Sequence and AutomationDirect DirectNet drivers can be used with Koyo/AutomationDirect DL300/DL400-series devices, including ones relabeled as TI or GE Fanuc. Devices labeled as TI 305/405 were equivalent to the PLCDirect/DirectLogic/AutomationDirect DL300/DL400 made by Koyo. PLCs labeled as GE Fanuc Series 1 were equivalent to DL300-series devices. A PLC Part Number Cross-Reference has been posted by AutomationDirect, which is the US contact for these product lines. Users whose drivers do not have the DL300-series model selections can set them to use a DL400 model with wider memory ranges than the PLC. Otherwise, users can upgrade to the current version of KEPServerEX (available at www.kepware.com ) to get the DL300-series model selections.
This is a printer-friendly version of Article 333216 and may be out of date. For the latest version click CS333216