Article - CS35913
Drawing not regenerated when retrieved although config.pro option "auto_regen_views" is set to "yes" in Creo Parametric
Modified: 07-Feb-2025
Applies To
- Pro/ENGINEER and Creo Elements/Pro Wildfire 2.0 to Wildfire 5.0
- Creo Parametric 1.0 to 11.0
Description
- Drawing not regenerated when retrieved although config.pro option auto_regen_views is set to yes
- Drawing is not accurate and sheets are not updated when first opened
- Getting warning/error message upon drawing retrieval : Retrieved object was previously saved with display
- Changes in model are not automatically updated in drawing
- Creating a hole in model does not automatically update the drawing
- How to disable automatic update when opening a drawing
- Regenerate active model does not update the model's drawing to the latest model version
- Lost associativity between model and drawing
- Is there an interactive command to lock the drawing to be unchanged after the original model has been modified
- Drawing view is not correctly updating after modifying a layer status
- Drawing of simplified representation is not updated after saving and retrieving the drawing
- Missing geometry in drawing view though feature available in Model Tree and drawing status is green
- Opening a modified saved drawing ignores the changes that were previously applied
- Open a drawing, some BOM balloons display doesn't match the BOM table; Click Update sheets, BOM balloons are updated according to the BOM table. From the message area, can see a waring Retrieved object was previously saved with display. We want to have the updated drawing without click Update Sheets.
- Drawing not updating when update the model with new dimensions
- The hole feature of the model is not visible in the drawing
- How can Creo engineering drawings be updated automatically? (Now that the 3D model has changed, the engineering drawing always has to be manually clicked to update)
- Drawing display different unless open the referenced model
- After the drawing model is updated, the 2D drawings must click update sheet to update (hope to click Regenerate to update automatically)
- Images are not visible in the Notebook (.lay) file.
- Cross Section arrows are displayed exceptionally long and beyond the drawing sheet size after drawing retrieval. The arrows go back to correct and expected location automatically when drawing model is regenerated.
- The information displayed in the 2D drawing file is inconsistent with the information displayed in the 3D model file
- After checking in a drawing, to save the latest view state
This is a printer-friendly version of Article 35913 and may be out of date. For the latest version click CS35913